This is not the latest approved version of this apprenticeship. View the latest version
This apprenticeship is in revision
This revised version has been agreed and is available for information only at present. It will replace the version 1.2 for new starts on 1 September 2025 with a funding band of £9,000. Further details of this and other apprenticeships in revision are available in the revisions status report.
Proposal approved
Occupational standard approved
End-point assessment plan approved
Funding approved
This document explains the requirements for end-point assessment (EPA) for the psychological wellbeing practitioner apprenticeship. End-point assessment organisations (EPAOs) must follow this when designing and delivering the EPA.
Psychological wellbeing practitioner apprentices, their employers and training providers should read this document.
A full-time psychological wellbeing practitioner apprentice typically spends 12 months on-programme. The apprentice must spend at least 12 months on-programme and complete the required amount of off-the-job training in line with the apprenticeship funding rules.
The EPA should be completed within an EPA period lasting typically 3 months.
The apprentice must complete their training and meet the gateway requirements before starting their EPA. The EPA will assess occupational competence.
An approved EPAO must conduct the EPA for this apprenticeship. Employers must work with the training provider to select an approved EPAO from the apprenticeship providers and assessment register (APAR).
This EPA has 3 assessment methods.
The grades available for each assessment method are below.
Assessment method 1 - professional discussion underpinned by a portfolio of evidence:
Assessment method 2 - examination:
Assessment method 3 - presentation with questions and answers:
The result from each assessment method is combined to decide the overall apprenticeship grade. The following grades are available for the apprenticeship:
The EPA is taken in the EPA period. The EPA period starts when the EPAO confirms the gateway requirements have been met and is typically 3 months.
The EPAO should confirm the gateway requirements have been met and start the EPA as quickly as possible.
The apprentice’s employer must be content that the apprentice is occupationally competent. That is, they are deemed to be working at or above the level set out in the apprenticeship standard and ready to undertake the EPA. The employer may take advice from the apprentice's training provider, but the employer must make the decision. The apprentice will then enter the gateway.
The apprentice must meet the gateway requirements before starting their EPA.
They must:
Portfolio of evidence requirements:
The apprentice must compile a portfolio of evidence during the on-programme period of the apprenticeship. It should only contain evidence related to the KSBs that will be assessed by the professional discussion. It will typically contain 15 discrete pieces of evidence. Evidence must be mapped against the KSBs. Evidence may be used to demonstrate more than one KSB; a qualitative as opposed to quantitative approach is suggested.
Evidence sources may include:
This is not a definitive list; other evidence sources can be included.
The portfolio of evidence should not include reflective accounts or any methods of self-assessment. Any employer contributions should focus on direct observation of performance, for example, witness statements, rather than opinions. The evidence provided should be valid and attributable to the apprentice; the portfolio of evidence should contain a statement from the employer and apprentice confirming this.
The EPAO should not assess the portfolio of evidence directly as it underpins the discussion. The independent assessor should review the portfolio of evidence to prepare questions for the discussion. They are not required to provide feedback after this review.
Gateway evidence must be submitted to the EPAO, along with any organisation specific policies and procedures requested by the EPAO.
The assessment methods must be delivered in the following order:
The professional discussion underpinned by a portfolio of evidence and the examination can be delivered in any order but must be passed before the presentation with question and answers can take place. The presentation must be the last assessment method taken.
The rationale is the presentation informs the result of the mandated qualification. Therefore the presentation within module 3 must not take place before the EPA gateway. The successful apprentice will pass both the EPA and the mandated qualification at the same time. This allows for an integrated approach.
The EPA is taken in the EPA period. The EPA period starts when the EPAO confirms the gateway requirements have been met and is typically 3 months. The EPAO should confirm the gateway requirements have been met and start the EPA as quickly as possible.
In the professional discussion, an independent assessor and apprentice have a formal two-way conversation. It gives the apprentice the opportunity to demonstrate the KSBs mapped to this assessment method.
The apprentice can refer to and illustrate their answers with evidence from their portfolio of evidence.
This assessment method is being used because:
The professional discussion must be structured to give the apprentice the opportunity to demonstrate the KSBs mapped to this assessment method to the highest available grade.
An independent assessor must conduct and assess the professional discussion. It will include the following themes:
The EPAO must give an apprentice 10 days' notice of the professional discussion.
The independent assessor must have at least 2 weeks to review the supporting documentation.
The apprentice must have access to their portfolio of evidence during the professional discussion.
The apprentice can refer to and illustrate their answers with evidence from their portfolio of evidence however, the portfolio of evidence is not directly assessed.
The professional discussion must last for 90 minutes. The independent assessor can increase the time of the professional discussion by up to 10%. This time is to allow the apprentice to respond to a question if necessary.
The apprentice may choose to end the assessment method early. The apprentice must be confident they have demonstrated competence against the assessment requirements for the assessment method. The independent assessor or EPAO must ensure the apprentice is fully aware of all assessment requirements. The independent assessor or EPAO cannot suggest or choose to end any assessment methods early, unless in an emergency. The EPAO is responsible for ensuring the apprentice understands the implications of ending an assessment early if they choose to do so. The independent assessor may suggest the assessment continues. The independent assessor must document the apprentice’s request to end the assessment early.
The independent assessor must ask at least 14 questions. The independent assessor must use the questions from the EPAO’s question bank or create their own questions in line with the EPAO’s training. Follow-up questions are allowed where clarification is required.
The independent assessor must make the grading decision.
The independent assessor must keep accurate records of the assessment. They must record:
The professional discussion must take place in a suitable venue selected by the EPAO for example, the EPAO’s or employer’s premises.
The professional discussion can be conducted by video conferencing. The EPAO must have processes in place to verify the identity of the apprentice and ensure the apprentice is not being aided.
The professional discussion should take place in a quiet room, free from distractions and influence.
The EPAO must develop a purpose-built assessment specification and question bank. It is recommended this is done in consultation with employers of this occupation. The EPAO must maintain the security and confidentiality of EPA materials when consulting with employers. The assessment specification and question bank must be reviewed at least once a year to ensure they remain fit-for-purpose.
The assessment specification must be relevant to the occupation and demonstrate how to assess the KSBs mapped to this assessment method. The EPAO must ensure that questions are refined and developed to a high standard. The questions must be unpredictable. A question bank of sufficient size will support this.
The EPAO must ensure that the apprentice has a different set of questions in the case of re-sits or re-takes.
The EPAO must produce the following materials to support the professional discussion underpinned by a portfolio of evidence:
The EPAO must ensure that the EPA materials are subject to quality assurance procedures including standardisation and moderation.
In the examination, the apprentice answers questions in a controlled and invigilated environment. It gives the apprentice the opportunity to demonstrate the knowledge and skills mapped to this assessment method.
Long answer questions (LAQs) are open-ended questions used to assess depth of knowledge in an examination. LAQs need an extended written response or an evaluative answer.
This assessment method is being used because:
The examination must be structured to give the apprentice the opportunity to demonstrate the knowledge and skills mapped to this assessment method to the highest available grade.
The test can be computer or paper based.
The apprentice must be given at least 10 days’ notice of the date and time of the test.
The test must consist of 10 long answer questions. Long answer questions need a written response. Responses to LAQs may be multiple lines, an approximate word count (such as 100 words), multiple paragraphs. This should be an extended writing opportunity for higher marked questions.
The grading table shows both the numerical grade boundaries and written descriptors for the examination. The grade boundaries and written descriptors must be used by EPAOs to create valid and reliable mark schemes for the examination.
The mark scheme design and approach can be determined by the EPAO (e.g. either levels based-banded, points or a mixture). EPAOs should ensure that the questions within the examination mirror the level of demand set by the wording within the supporting written descriptors. This should be done by using the same command verb where possible (or a comparable verb, in terms of demand, where not).
The grading table should inform the question writing whilst also providing EPAOs with the numerical outcomes required for each level of attainment. Questions may be written that target part of the KSB statement, as long as, the full statement is assessed within the paper overall. However, EPAOs must ensure that the level of demand is not altered as per the supporting written descriptors.
Employers have determined the levels of performance required by apprentices on the examination. The minimum level of performance required to demonstrate competency at a pass standard is set at 50% (or 50 marks) of the total 100 marks available. To support overall standards alongside the overall mark requirements, apprentices must also achieve a minimum of 20 marks against each theme. To demonstrate a distinction, the standard is set at 70% (or 70 marks) of the 100 marks available.
EPAOs must ensure that their mark scheme approach supports these required standards in a reliable way. Specifically, if a levels-based, banded mark scheme design is used then the quality of performance described within each band descriptor should be set in an appropriate way to safeguard standards.
The apprentice must have 90 minutes to complete the test.
The test is closed book which means that the apprentice cannot refer to reference books or materials whilst taking the test.
The test must be taken in the presence of an invigilator who is the responsibility of the EPAO. The EPAO must have an invigilation policy setting out how the test must be conducted. It must state the ratio of apprentices to invigilators for the setting and allow the test to take place in a secure way.
The EPAO must verify the apprentice’s identity and ensure invigilation of the apprentice for example, with 360-degree cameras and screen sharing facilities.
The EPAO is responsible for the security of the test including the arrangements for on-line testing. The EPAO must ensure that their security arrangements maintain the validity and reliability of the test.
The EPAO must develop a marking scheme based on the grading descriptors for this assessment method. The test must be marked by an independent assessor or marker employed by the EPAO. They must follow the marking scheme produced by the EPAO.
The EPAO is responsible for overseeing the marking of the test. The EPAO must ensure standardisation and moderation of tests with written answers.
The apprentice must take the test in a suitably controlled and invigilated environment that is a quiet room, free from distractions and influence. The EPAO must check the venue is suitable.
The test can take place remotely if the appropriate technology and systems are in place to prevent malpractice.
The EPAO must develop a purpose-built assessment specification and question bank. It is recommended this is done in consultation with employers of this occupation. The EPAO should maintain the security and confidentiality of EPA materials when consulting with employers. The assessment specification and question bank must be reviewed at least once a year to ensure they remain fit-for-purpose.
The assessment specification must be relevant to the occupation and demonstrate how to assess the KSBs mapped to this assessment method. The EPAO must ensure that questions are refined and developed to a high standard. The questions must be unpredictable. A question bank of sufficient size will support this.
The EPAO must ensure that the apprentice has a different set of questions in the case of re-sits or re-takes.
The EPAO must produce the following materials to support the test:
The EPAO must ensure that the EPA materials are subject to quality assurance procedures including standardisation and moderation.
In the presentation with questions, the apprentice delivers a presentation to an independent assessor on a set subject. The independent assessor must ask questions after the presentation. It gives the apprentice the opportunity to demonstrate the KSBs mapped to this assessment method.
This assessment method is being used because:
The presentation with questions and answers must be structured to give the apprentice the opportunity to demonstrate the KSBs mapped to this assessment method to the highest available grade.
An independent assessor must conduct and assess the presentation with questions.
The presentation must cover:
The purpose of the presentation is to allow the apprentice to demonstrate their competence against the grading descriptors.
The apprentice must submit any presentation materials to the EPAO by the end of week 2 of the EPA period. The apprentice must notify the EPAO, at that point, of any technical requirements for the presentation.
During the presentation, the apprentice must have access to:
The independent assessor must have at least 2 weeks to review any presentation materials, before the presentation is delivered by the apprentice, to allow them to prepare questions. The EPAO must give the apprentice at least 10 days' notice of the presentation assessment.
The independent assessor must ask questions after the presentation.
The purpose of the questions is:
The presentation and questions must last 45 minutes. This will typically include a presentation of 20 minutes and questioning lasting 25 minutes. The independent assessor must use the full time available for questioning. The independent assessor can increase the total time of the presentation and questioning by up to 10%. This time is to allow the apprentice to complete their last point or respond to a question if necessary.
The apprentice may choose to end the assessment method early. The apprentice must be confident they have demonstrated competence against the assessment requirements for the assessment method. The independent assessor or EPAO must ensure the apprentice is fully aware of all assessment requirements. The independent assessor or EPAO cannot suggest or choose to end any assessment methods early, unless in an emergency. The EPAO is responsible for ensuring the apprentice understands the implications of ending an assessment early if they choose to do so. The independent assessor may suggest the assessment continues. The independent assessor must document the apprentice’s request to end the assessment early.
The independent assessor must ask at least 5 questions. They must use the questions from the EPAO’s question bank or create their own questions in line with the EPAO’s training. Follow up questions are allowed where clarification is required.
The independent assessor must make the grading decision. The independent assessor must assess the presentation and answers to questions holistically when deciding the grade.
The independent assessor must keep accurate records of the assessment. They must record:
The presentation with questions must be delivered by the awarding body of the Certificate in Psychological Wellbeing Practice qualification, it is their responsibility to ensure the independent assessor conforms to the requirements set out in the roles and responsibilities table and results of this method must be shared with the EPAO for the other methods at the earliest opportunity to not delay apprentice certification.
The presentation with questions must take place in a suitable venue selected by the EPAO for example, the EPAO’s or employer’s premises. The presentation with questions should take place in a quiet room, free from distractions and influence.
The presentation with questions and answers can be conducted by video conferencing. The EPAO must have processes in place to verify the identity of the apprentice and ensure the apprentice is not being aided.
The EPAO must develop a purpose-built assessment specification and question bank. It is recommended this is done in consultation with employers of this occupation. The EPAO must maintain the security and confidentiality of EPA materials when consulting with employers. The assessment specification and question bank must be reviewed at least once a year to ensure they remain fit-for-purpose.
The assessment specification must be relevant to the occupation and demonstrate how to assess the KSBs mapped to this assessment method. The EPAO must ensure that questions are refined and developed to a high standard. The questions must be unpredictable. A question bank of sufficient size will support this.
The EPAO must ensure that the apprentice has a different set of questions in the case of re-sits or re-takes.
The EPAO must produce the following materials to support the presentation with questions and answers:
The EPAO must ensure that the EPA materials are subject to quality assurance procedures including standardisation and moderation.
Performance in the EPA determines the overall grade of:
An independent assessor must individually grade the professional discussion underpinned by a portfolio of evidence, examination and presentation with questions and answers in line with this EPA plan.
The EPAO must combine the individual assessment method grades to determine the overall EPA grade.
If the apprentice fails one assessment method or more, they will be awarded an overall fail.
To achieve an overall pass, the apprentice must achieve at least a pass in all the assessment methods. To achieve an overall merit, the apprentice must achieve one distinction. To achieve an overall distinction, the apprentice must achieve two distinctions.
Grades from individual assessment methods must be combined in the following way to determine the grade of the EPA overall.
If the apprentice fails one assessment method or more, they can take a re-sit or a re-take at their employer’s discretion. The apprentice’s employer needs to agree that a re-sit or re-take is appropriate. A re-sit does not need further learning, whereas a re-take does. The apprentice should have a supportive action plan to prepare for a re-sit or a re-take.
The employer and the EPAO should agree the timescale for a re-sit or re-take. A re-sit is typically taken within 1 months of the EPA outcome notification. The timescale for a re-take is dependent on how much re-training is required and is typically taken within 3 months of the EPA outcome notification.
Failed assessment methods must be re-sat or re-taken within a 6-month period from the EPA outcome notification, otherwise the entire EPA will need to be re-sat or re-taken in full.
Re-sits and re-takes are not offered to an apprentice wishing to move from pass to a higher grade.
The apprentice will get a maximum EPA grade of pass if they need to re-sit or re-take one or more assessment methods, unless the EPAO determines there are exceptional circumstances.
The EPAO must have reasonable adjustments arrangements for the EPA.
This should include:
Adjustments must maintain the validity, reliability and integrity of the EPA as outlined in this EPA plan.
Special considerations
The EPAO must have special consideration arrangements for the EPA.
This should include:
Special considerations must maintain the validity, reliability and integrity of the EPA as outlined in this EPA plan.
Internal quality assurance refers to the strategies, policies and procedures that an EPAO must have in place to ensure valid, consistent and reliable EPA decisions.
EPAOs for this EPA must adhere to the requirements within the roles and responsibilities table.
They must also appoint independent assessors who:
Affordability of the EPA will be aided by using at least some of the following:
This apprenticeship aligns with:
| Version | Change detail | Earliest start date | Latest start date |
|---|---|---|---|
| Revised version awaiting implementation | In revision | 01/09/2025 | Not set |
| 1.2 | Funding band revised | 07/08/2020 | 31/08/2025 |
| 1.1 | End-point assessment plan revised | 06/05/2020 | 06/08/2020 |
| 1.0 | Retired | 22/03/2019 | 05/05/2020 |
Crown copyright © 2025. You may re-use this information (not including logos) free of charge in any format or medium, under the terms of the Open Government Licence. Visit www.nationalarchives.gov.uk/doc/open-government-licence