Install and maintain electrical services within a domestic setting.
This occupation is found in the domestic dwelling construction, engineering and social housing installation and maintenance electrician industries. Domestic electricians work in domestic properties such as homes, dwellings, or individual units in e.g. care homes, apartment buildings and student accommodation, rather than in their communal areas, or on commercial or industrial building sites. Industrial and Commercial Electrician work is not undertaken by a Domestic Electrician.
Domestic electricians may work for small independent businesses or for providers of homes and residential services such as local authorities and housing associations, housing construction companies, care homes, electric utility companies and other companies providing electrotechnical services to the residential market. Once qualified, some domestic electricians may choose to become self-employed contractors.
The broad purpose of the occupation is to install and maintain electrical services within a domestic setting.
Working in a residential (new construction, installation or existing) setting, the domestic electrician will focus on the installation of new, the upgrade or repair of existing cables and equipment to enable safe and reliable distributed electricity within the premises.
The scope of a domestic electrician will include design, installation and testing of systems which provide traditional heating, power, and lighting plus the installation of new and emerging technologies. The new technologies will include enhanced connectivity for domestic use and comfort and convenience technologies. Domestic electricians will help make homes highly efficient and near-zero-carbon, in cooperation with other trades. Domestic electricians may be required to provide out of hours emergency repairs and services. A driving licence may be a requirement for some employers.
In their daily work, a worker in this occupation interacts with:
· Their customers who are usually the end user of the services.
· the team leader or area manager as well as personnel responsible for materials storage and supply if they work in an organisation.
· building materials suppliers, merchants, small business support, accountants, and others if they are self-employed.
· A domestic electrician will sometimes work within a team or may often be accompanied an apprentice.
An employee in this occupation will be responsible for completing their own work to specification, with minimal, if any, supervision, ensuring they meet set deadlines. This role is for people who like to work independently most of the time, but it also involves interacting with customers, colleagues, and others.
Domestic Electricians will be responsible for meeting quality requirements and working in accordance with industry-defined health, safety and environmental considerations, as well as building and wiring regulations.
They may be solely responsible for company property such as tools, work vehicles for transporting materials such as company vans.
Key requirements for successful domestic electricians include professionalism and high regard for customer service throughout the job from responding to enquiries, proposing solutions, providing quotations, undertaking work, and handing completed work back to the customer.
Typical Job Titles:
Domestic Electrician.
Typical duration: 36 months
This summary page outlines the information that you and your employer need to know about your end-point assessment (EPA). You and your employer should also read the end-point assessment plan for the full details including roles and responsibilities, assessment method requirements and re-sits and re-takes.
An EPA is an assessment at the end of the apprenticeship. It assesses your competence against the knowledge, skills and behaviours (KSBs) on the occupational standard. You will have been trained on them during your training, both on and off the job. The EPA is your chance to show an independent assessor you can do the occupation you have been trained for. Your employer will only recommend you start the EPA when you have finished your training and both your employer and you think you are ready. Your employer will choose an end-point assessment organisation (EPAO) to deliver the EPA. Your employer and training provider should provide you with support on what to expect and how to prepare for your EPA.
The typical length of the on-programme (training) part of this apprenticeship is 36 months. The end-point assessment period will typically last 6 months.
The grades available for this apprenticeship are:
Observation of practical competence in a controlled environment
Scenario based interview
Online knowledge assessment
At the end of the apprenticeship, and having passed the EPA, you will be awarded with your apprenticeship certificate.
The gateway is the point when all on-programme training and any mandatory qualification requirements have been met. When you have completed your training and your employer says you are competent in your occupation, you enter the gateway. The EPAO will check any mandatory qualifications are complete. They will tell you how to submit any necessary documents (for example, a portfolio). After the EPAO confirms that you have met all the requirements, the EPA starts.
When you reach the gateway, you need to complete the following:
You must have achieved English and maths qualifications inline with apprenticeship funding rules.
Passed any other mandated qualifications listed in the occupational standard. For the domestic electrician,
The qualification(s) required are:
Electrotechnical in dwellings qualification
Observation: you will be observed by a NET independent assessor while you perform typical electrical tasks in a controlled environment in a NET Licensed Assessment Centre. The observation is part of the holistic assessment and will take place over three consecutive days for a total of 19 hours observation.
Scenario based interview: you will also have a formal 2-way interview with the NET independent assessor. The assessor will ask you a minimum of 12 scenario based questions as detailed in the EPA. The interview will take 90 minutes, with a maximum of 9 extra minutes if you need to finish your last response. The interview should take place in a quiet room, free from distractions and influence. The interview is part of the holistic assessment and will take place on one of the three assessment days.
Online Knowledge Assessment: you will also sit an online knowledge assessment at the assessment centre. The online knowledge assessment will be computer based and will consist of 40 multiple-choice questions. Each question will have four suggested answers, only one of which is correct. You will be permitted to refer to the BS7671 current Edition, IET Guidance note 3 and the IET Electricians Guide to the Building Regulations. NET assessment centre will provide you with access to those reference works throughout the duration of your test. To pass this test you need to answer a minimum of 24 questions correctly. To obtain a distinction you need to answer 33 or more questions correctly. The online knowledge assessment will take a maximum of 90 minutes and will take place on one of the three assessment days.
You will get at least 10 days’ notice of your assessment dates.
If you have a query that relates to your job, then please speak to your employer. You should speak to your training provider if you have any other questions about the apprenticeship including the end-point assessment. You should get detailed support from the EPAO before the EPA begins. Your employer and training provide should talk to you when they think you are ready to take the EPA. The EPA is for you to show how good you are at your job. You should speak to your training provider about what to expect in the EPA and how to prepare. You should speak to the EPAO if your EPA has already started, and you have a query.
If you have a disability, a physical or mental health condition or other special considerations, you may be able to have a reasonable adjustment that takes this into account. You should speak to your employer, training provider and EPAO and ask them what support you can get. The EPAO will decide if an adjustment is appropriate.
This apprenticeship aligns with This apprenticeship standard is recognised by the Joint Industry Board as conferring eligibility for recognition via an ECS Domestic Electrician Gold Card. As part of the application process the appropriate Health and Safety components will be recognised. for This apprenticeship standard is recognised by the Joint Industry Board as conferring eligibility for recognition via an ECS Domestic Electrician Gold Card. As part of the application process the appropriate Health and Safety components will be recognised.. The experience gained and responsibility held by the apprentice on completion of the apprenticeship will either wholly or partially satisfy the requirements for registration at this level.
Please contact the relevant professional body for more details.
This occupation is found in the domestic dwelling construction, engineering and social housing installation and maintenance electrician industries. Domestic electricians work in domestic properties such as homes, dwellings, or individual units in e.g. care homes, apartment buildings and student accommodation, rather than in their communal areas, or on commercial or industrial building sites. Industrial and Commercial Electrician work is not undertaken by a Domestic Electrician.
Domestic electricians may work for small independent businesses or for providers of homes and residential services such as local authorities and housing associations, housing construction companies, care homes, electric utility companies and other companies providing electrotechnical services to the residential market. Once qualified, some domestic electricians may choose to become self-employed contractors.
The broad purpose of the occupation is to install and maintain electrical services within a domestic setting.
Working in a residential (new construction, installation or existing) setting, the domestic electrician will focus on the installation of new, the upgrade or repair of existing cables and equipment to enable safe and reliable distributed electricity within the premises.
The scope of a domestic electrician will include design, installation and testing of systems which provide traditional heating, power, and lighting plus the installation of new and emerging technologies. The new technologies will include enhanced connectivity for domestic use and comfort and convenience technologies. Domestic electricians will help make homes highly efficient and near-zero-carbon, in cooperation with other trades. Domestic electricians may be required to provide out of hours emergency repairs and services. A driving licence may be a requirement for some employers.
In their daily work, a worker in this occupation interacts with:
· Their customers who are usually the end user of the services.
· the team leader or area manager as well as personnel responsible for materials storage and supply if they work in an organisation.
· building materials suppliers, merchants, small business support, accountants, and others if they are self-employed.
· A domestic electrician will sometimes work within a team or may often be accompanied an apprentice.
An employee in this occupation will be responsible for completing their own work to specification, with minimal, if any, supervision, ensuring they meet set deadlines. This role is for people who like to work independently most of the time, but it also involves interacting with customers, colleagues, and others.
Domestic Electricians will be responsible for meeting quality requirements and working in accordance with industry-defined health, safety and environmental considerations, as well as building and wiring regulations.
They may be solely responsible for company property such as tools, work vehicles for transporting materials such as company vans.
Key requirements for successful domestic electricians include professionalism and high regard for customer service throughout the job from responding to enquiries, proposing solutions, providing quotations, undertaking work, and handing completed work back to the customer.
Typical Job Titles:
Domestic Electrician.
Typical duration: 36 months
| Duty | KSBs |
|---|---|
|
Duty 1 Understand fully and work in full compliance with health, safety, and environmental regulations; building regulations; industry guidance notes; relevant codes of practice, the requirements of the current edition of the Wiring Regulations (BS7671) and other relevant standards |
|
|
Duty 2 Always provide appropriate customer service, prioritising their care, safety, and security and that of any children and pets on customer property |
|
|
Duty 3 Undertake the installation of both wired and wireless solutions in achieving a desired outcome appropriate to customer need in accordance with the requirements of BS 7671 and other relevant industry standards, and assess electrical loads on domestic installations to ensure safe and suitable solutions can be provided to the customer including assisted living technologies, lighting design and comfort and convenience technologies |
|
|
Duty 4 Plan and deliver the best solution for the customer, incorporating and integrating comfort and convenience technologies for the homeowner, within agreed budget, including the installation, maintenance, and inspection of domestic electric vehicle charging systems and other domestic use special installations, in accordance with the requirements of BS 7671 and other relevant industry standards |
|
|
Duty 5 Carry out electrical installation, initial verification, maintenance and testing work on a variety of voltages; both AC and DC; not exceeding 230V single phase |
|
|
Duty 6 Site and install mains powered smoke and heat detectors for domestic premises only and advise the customer regarding electric vehicle (EV) charging points, detector cleaning, maintenance, and user testing. |
|
|
Duty 7 Design and install wiring for domestic heating systems including central heating boilers and other domestic heating systems which need electrical connections |
|
|
Duty 8 Understand the different types of environmental technologies that may be found in a domestic dwelling including solar photovoltaic systems, heat pumps, micro wind turbines and domestic battery storage and their interaction with conventional electrical installations |
|
|
Duty 9 Install cables within the fabric of the building for internal and external installations while maintaining the integrity of fire compartments and customers belongings |
|
|
Duty 10 Understand the need for appropriate consideration towards, and knowledge of specialist requirements when working in historical installations and settings |
|
|
Duty 11 Carry out maintenance regimes, periodic inspection and testing of existing single phase domestic electrical installations in accordance with manufacturer instructions and the requirements for electrical installations |
|
|
Duty 12 Prepare and complete relevant work documentation from quotation to certification and handover stages |
|
|
Duty 13 Understand how to plan and project manage typical Domestic Electrician work |
K1: Understand relevant health & safety legislation and safe working practices covering hazards and risks when undertaking domestic electrical work and how these can be avoided.
Back to Duty
K2: Personal protective equipment (PPE) that should be used when undertaking electrical work, the correct selection of PPE and how to use different PPE.
Back to Duty
K3: Understand how to, and importance of, restoring the work area to a tidy and safe state on completion of work
Back to Duty
K4: Effective communication techniques and methods when communicating with people in different roles, and the full range of people and their roles that Domestic Electricians will interact with in their work.
Back to Duty
K5: Importance of customer service and effective customer service principles and techniques, taking account of the differences between people and groups of people with respect to equality and diversity
Back to Duty
K6: Understand key organisations and their purpose within the electrical installation and maintenance industry, the domestic electrician's role within the industry, and career progression routes
Back to Duty
K7: Relevant legislation pertaining to Domestic Electrical work including building regulations; industry guidance notes; relevant codes of practice, the requirements of the current edition of the Wiring Regulations (BS7671) and related standards.
Back to Duty
K8: Relevant sources of technical information and guidance specifically for domestic electrical installation and maintenance work, mainly including electrical drawings and technical specifications and why and how these should be used.
Back to Duty
K9: Necessary mathematical techniques, formulae, and calculations that underpin a Domestic Electrician’s work.
Back to Duty
K10: Range of tools, materials, equipment, and components used when performing domestic electrical work, and how to identify and use them safely.
Back to Duty
K11: Purpose of different domestic electrical and electronic equipment, installations, components and systems and their characteristics, features, installation and maintenance requirements, including domestic heating systems, comfort and convenience technologies and smart home applications and devices.
Back to Duty
K12: Process and procedures for the design, planning, set up, and installation of domestic electrical and electronic systems
Back to Duty
K13: Methods of terminating and connecting cables in domestic electrical wiring systems, installations, and equipment.
Back to Duty
K14: Inspection and Testing of Domestic Electrical Installations using different diagnostic and problem-solving techniques and methods used to find, assess, and resolve domestic electrical and electronic faults for both initial and periodic testing requirements of single-phase installations
Back to Duty
K15: Importance of accurate preparation, completion, and maintenance of relevant work documentation including observations, test results and certification documents
Back to Duty
K16: How to prepare written quotes and estimates in a professional manner
Back to Duty
K17: Application of information technology in the Domestic electrician industry, such as completion of test certificates and work documentation
Back to Duty
K18: Identify current digital learning platforms, and platforms used for business communication and collaboration.
Back to Duty
K19: Understand the requirements for continual personal development within the industry and the opportunities for career progression
Back to Duty
S1: Maintain the safety of self and others by applying statutory health and safety policies, procedures, and regulations when conducting domestic electrical work.
Back to Duty
S2: Identify and comply with all relevant legislation, regulations, codes of practice and other relevant information and guidance when planning and performing domestic electrical work.
Back to Duty
S3: Correctly identify and use personal protective equipment (PPE) that should be used when undertaking domestic electrical work.
Back to Duty
S4: Carry out work in a tidy and safe manner, including restoration of the work area on completion of work
Back to Duty
S5: Communicate using effective techniques and methods with colleagues, customers, contractors, suppliers and others
Back to Duty
S6: Apply appropriate customer service principles and techniques to deliver the required customer service
Back to Duty
S7: Apply relevant legislation; building regulations; industry guidance notes; relevant codes of practice, the requirements of the current edition of the Wiring Regulations (BS7671) and other relevant standards while carrying out work
Back to Duty
S8: Use relevant sources of information and guidance for domestic electrical installation and maintenance work, typically including electrical drawings and technical specifications.
Back to Duty
S9: Apply and use necessary mathematical techniques, formulae, and calculations that underpin a Domestic Electrician’s work
Back to Duty
S10: Safely and correctly use a range of tools, materials, equipment, and components relevant to performing domestic electrical work.
Back to Duty
S11: Design, plan, set up, and install domestic electrical and electronic systems including terminating and connecting cables in domestic electrical wiring systems, installations, and equipment
Back to Duty
S12: Inspect and test domestic electrical Installations using the correct test equipment
Back to Duty
S13: Apply diagnostic and problem-solving techniques to identify, assess and resolve domestic electrical and electronic faults for both initial and periodic testing requirements of single-phase installations
Back to Duty
S14: Install and maintain domestic electrical and electronic equipment and components, including domestic heating systems, comfort and convenience technologies, heat pumps, solar panels, Electric Vehicle (EV) charging points and devices
Back to Duty
S15: Carry out and manage own work ensuring work is compliant to the relevant standard
Back to Duty
S16: Record work accurately using correct processes including completion and maintenance of work documentation, recording of test results and preparation of appropriate certification
Back to Duty
S17: Use relevant digital learning platforms and business communication and collaboration applications
Back to Duty
B1: Acts responsibly and contributes to safe outcomes. Puts health and safety first for themselves and others. Embeds a health and safety culture and is always hazard and risk aware during work. Challenges any unsafe practices and demonstrates personal accountability
Back to Duty
B2: Embraces a sustainable working culture, taking responsibility for the careful use of resources and disposal of work waste
Back to Duty
B3: Demonstrates commitment to quality, commercial awareness, and continuous improvement by complying with health, safety and welfare requirements, industry standards, statutory regulation and legislation, policies, and codes of practice.
Back to Duty
B4: Focuses on the requirements of the customer (internal and external), seeking to provide outstanding customer services, promoting green technologies when appropriate, meeting, or exceeding customer requirements, including customers with diverse needs and transitioning to green technologies.
Back to Duty
B5: Manages own time efficiently to complete work operations and effectively schedule work within the confines of job responsibility
Back to Duty
B6: Committed to keeping up to date with industry best practice, relevant legislation and technical standards and undertaking personal CPD in line with industry best practice.
Back to Duty
Apprentices without level 2 English and maths will need to achieve this level prior to taking the End-Point Assessment. For those with an education, health and care plan or a legacy statement, the apprenticeship’s English and maths minimum requirement is Entry Level 3. A British Sign Language (BSL) qualification is an alternative to the English qualification for those whose primary language is BSL.
Level: 3
This standard aligns with the following professional recognition:
V1.0
This document explains the requirements for end-point assessment (EPA) for the domestic electrician apprenticeship. The end-point assessment organisation (EPAO) must follow this when designing and delivering their EPA.
Domestic electrician apprentices, their employers and training providers should read this document.
National Electrotechnical Training (NET) is the sole EPAO for this EPA and must conduct the EPA for this apprenticeship.
NET is the industry charity whose purpose is to independently assure electrotechnical competence. It owns and delivers AM2 which is the competence assessment for the electrical industry. A modified version of AM2 will form the EPA for the domestic electrician apprenticeship standard.
Their responsibilities include:
• external quality assurance of the domestic electrician apprenticeship standard
• the production of all assessment material
• provision of the premises in which all assessment takes place (via the NET licensed centre network)
• provides the licence for NET approved and qualified assessors to undertake the independent assessment of the EPA
• confirming competence via the EPA which confers eligibility for the award of an ECS gold card by the Joint Industry Board (JIB)
The EPA will be conducted under controlled conditions by NET licensed independent assessors and will be available through NET’s licensed centre network of over 50 centres across England, Wales and Northern Ireland.
A full-time apprentice typically spends 36 months on-programme (this means in training before the gateway) working towards competence as a domestic electrician. All apprentices must spend at least 12 months on-programme. All apprentices must complete the required amount of off-the-job training specified by the apprenticeship funding rules.
This EPA has 3 assessment methods.
The grades available for each EPA method are:
EPA method 1 - observation of practical competence in a controlled environment:
EPA method 2 - scenario based interview:
EPA method 3 - online knowledge assessment:
The result from each EPA method is combined to decide the overall apprenticeship grade. The following grades are available for the apprenticeship:
|
On-programme - typically 36 months
|
The apprentice must complete training to develop the knowledge, skills and behaviours (KSBs) of the occupational standard. The apprentice must complete training towards English and maths qualifications in line with the apprenticeship funding rules. The apprentice must complete training towards any other qualifications listed in the occupational standard. The qualification(s) required are: Electrotechnical in dwellings qualification |
|---|---|
|
End-point assessment gateway
|
The employer must be content that the apprentice is working at or above the level of the occupational standard. The apprentice’s employer must confirm that they think the apprentice:
An apprentice must have passed any other qualifications listed in the domestic electrician occupational standard ST1017. The qualification(s) required are: Electrotechnical in dwellings qualification The apprentice must have achieved English and maths qualifications in line with the apprenticeship funding rules. The employer, apprentices and training provider must complete and sign the Readiness for Assessment checklist. Apprentices must submit any policies and procedures as requested by the EPAO. |
|
End-point assessment - typically 6 months
|
Grades available for each method: Observation of practical competence in a controlled environment
Scenario based interview
Online knowledge assessment
Overall EPA and apprenticeship can be graded:
|
|
Professional recognition
|
This apprenticeship standard is recognised by the Joint Industry Board as conferring eligibility for recognition via an ECS Domestic Electrician Gold Card. As part of the application process the appropriate Health and Safety components will be recognised.
|
|
Re-sits and re-takes
|
|
The EPA will be taken within the EPA period. The EPA period begins when the EPAO confirms the gateway requirements are met and is typically 6 months.
The expectation is that the EPAO will confirm the gateway requirements are met and the EPA begins as quickly as possible.
All assessment methods for the EPA will take place over 3 consecutive days.
The apprentice’s employer must confirm that they think the apprentice is working at or above the occupational standard as a domestic electrician. They will then enter the gateway. The employer may take advice from the apprentice's training provider(s), but the employer must make the decision. In making this decision, the employer may take advice from the apprentice's training provider(s), but the decision must ultimately be made solely by the employer and confirmed through the Readiness for Assessment checklist.
NET as the EPAO determines when all other gateway requirements have been met, and the EPA period will only start once the EPAO has confirmed this.
Apprentices must meet the following gateway requirements before starting their EPA.
These are:
Apprentices must submit any policies and procedures as requested by the EPAO.
The EPA period starts when the EPAO confirms all gateway requirements have been met. The expectation is they will do this as quickly as possible.
The assessment methods can be delivered in any order.
The result of one assessment method does not need to be known before starting the next.
All assessment methods for the EPA will take place over 3 consecutive days. It is recommended that the apprentice does not exceed a 7.5 hour working day and breaks should be permitted as per NET guidance.
In an observation of practical competence in a controlled environment, a NET licensed independent assessor observes an apprentice carrying out a range of simulated electrical exercises which reflect typical electrical work carried out in the workplace.
The observation of practical competence in a controlled environment must be assessed holistically by the NET licensed independent assessor when they are deciding the grade for the observation of practical competence in a controlled environment.
This EPA method is being used because:
The practical installation reflects the scope of a domestic electrician’s work as set out in the KSBs, and is typical of the apprentice’s work, ensuring that they can demonstrate the range specified within the occupational standard in practice. As part of a domestic electrician’s role, they will be expected to carry out an installation to a specification and test and inspect using the appropriate British Standards and associated guidance notes, with an awareness of net zero/green technologies. Therefore, this method of assessment is deemed as the most appropriate for this occupation as it accurately reflects all environments and current workplace tasks of the apprentice, which may not be available in a timely, standardised manner to the apprentice, if observed in the real working environment.
AM2 is the benchmark required for all domestic electricians. This is the agreed competence standard for the industry. This will be a modified competence assessment sampled from the current Industry Assessment of Competence AM2, the apprenticeship covers the professional recognition required for a domestic electrician.
The observation of practical competence in a controlled environment must be structured to give the apprentice the opportunity to demonstrate the KSBs mapped to this EPA method.
The observation will take place in controlled conditions within a NET licensed assessment centre. NET licensed independent assessors can observe up to 4 apprentices at a time for each component as specified by NET guidance.
The EPAO must give an apprentice 10 days notice of the observation.
The observation must take 19 hours.
The observation of practical competence in a controlled environment must allow the apprentice the opportunity to demonstrate the KSBs mapped to this assessment method.
The observation may take place in parts but must be completed within 3 working days. A working day is typically 7.5 hours. The reason for this split is to accommodate the
different components that take several hours to complete.
The EPAO must manage invigilation of apprentices at all times to maintain security of the EPA, in line with their malpractice policy. This includes breaks and moving between locations.
The NET licensed independent assessor must explain to the apprentice the format and timescales of the observation before it begins. This does not count towards the assessment time.
The NET licensed independent assessor should observe the following during the observation:
Component 1 - planning, safe isolation and risk assessment (1 hour)
Apprentices will prepare and complete a risk assessment for the assessment area work environment. Associated to this will be an observed exercise of safely isolating the domestic installation and net zero/green technologies before working on the installation.
Component 1 includes:
• a completed risk assessment
• NET Licensed independent assessor undertaking visual observation of the apprentice completing the preferred isolation procedure (safety critical to include PV array)
• planning for installation.
Component 2 - domestic installation observation (10.5 hours)
Apprentices will install a domestic installation with respect to a set specification, including circuits for net zero/green technologies. Monitoring of the installation for safe practice will be conducted by the NET licensed independent assessor and then assessed when the installation is complete. If this section is not completed within the component assigned time, then the assessment will be recorded as ‘out of time’ and this component will be deemed to have been failed.
Including:
Component 3 - domestic testing and associated regulatory documents. (5.5 hours)
Overview
Apprentices will test the installed domestic installation in accordance with the British Standard and associated guidance documents, which will be available for reference. Due to the sensitivity and safety critical nature of this element, it must be fully observed by the NET licensed independent assessor. The NET licensed independent assessor will monitor to ensure safe practice throughout this component and the assessment will be stopped and graded as a fail, should unsafe practice occur. If this section is not completed within the specified time, then the assessment will be recorded as ‘out of time’ and this component will be deemed to have been failed.
This will include
Component 4 - fault finding and condition reporting on domestic circuits (2 hours)
Apprentices will use their knowledge and skills to interrogate a domestic installation and identify faults on simulated faulty circuits commonly found in domestic premises. It will be observed by a NET licensed independent assessor for the apprentice to undertake tasks on a simulated domestic installation. The assessment will be stopped and graded as a fail, should unsafe practice occur. If this section is not completed within the specified time, then the assessment will be recorded as ‘out of time’ and this component will be deemed to have been failed.
This will include:
These activities provide the apprentice with the opportunity to demonstrate the KSBs as shown in the mapping.
The NET licensed independent assessor conducts and assesses the observation of practical competence in a controlled environment. They must record the KSBs observed.
The NET licensed independent assessor makes all grading decisions.
The EPA will take place under controlled conditions in a NET licensed assessment centre.
The EPAO must produce the following materials to support the observation of practical competence in a controlled environment:
In the interview, a NET licensed independent assessor and apprentice have a formal two-way conversation. It gives the apprentice the opportunity to demonstrate their competency across the KSBs as shown in the mapping.
This assessment method has 1 component. The interview consists of an NET licensed independent assessor asking an apprentice a series of scenario-based questions to assess their responses against the KSBs for this method. The NET licensed independent assessor leads this process to obtain information from the apprentice to enable a structured assessment decision-making process.
This EPA method is being used because:
An NET licensed independent assessor will conduct and assess the interview. The interview will last 90 minutes. The NET licensed independent assessor has the discretion to increase the time of the interview by up to 10% to allow the apprentice to complete their last answer. The interview will have a minimum of 12 scenario based questions. During this method, the NET licensed independent assessor must use questions from the question bank derived on typical domestic installation scenarios.
The purpose of the questions will be to cover the following themes:
• communication
• customer service
• safety
• commercial awareness (defined as: a sustainable and economic approach to work)
• quality and continuous improvement
• continuous professional development.
Questions will be open and designed to elicit responses against the KSBs prescribed for this method. NET licensed independent assessors must use the question bank as a source for questioning and marking materials supplied by NET. KSBs met and answers to questions, must be recorded by the NET licensed independent assessor. The interview will be recorded to aid moderation and quality assurance.
The interview will take place in a NET licensed centre incorporated within the allocated 3 days of EPA time.
The interview should take place in a quiet room, free from distractions and influence.
A question bank will be developed by NET as the EPAO.
The specification must be relevant to the occupation and demonstrate how to assess the KSBs shown in the mapping. The EPAO should maintain the security and confidentiality of EPA materials when consulting employers. The questions must be unpredictable. A question bank of sufficient size will support this. The assessment specification and questions must be reviewed at least once a year to ensure they remain fit-for-purpose.
The EPAO must develop purpose-built question banks and ensure that appropriate quality assurance procedures are in place, for example, considering standardisation, training and moderation. The EPAO must ensure that questions are refined and developed to a high standard.
The EPAO must ensure that apprentices have a different set of questions in the case of re-sits or re-takes.
The EPAO must produce the following materials to support the scenario based interview:
A test is an assessment for asking questions in a controlled and invigilated environment.
This EPA method is being used because:
This method must be appropriately structured to give the apprentice the opportunity to demonstrate the KSBs mapped to this EPA method to the highest available grade.
The online knowledge assessment will be computer based.
The online knowledge assessment will consist of 40 multiple-choice questions.
Multiple-choice questions will have four options, including one correct answer.
Apprentices must be given at least 10 days notice of the date and time of the online knowledge assessment.
Apprentices must have 90 minutes to complete the test.
The following equipment is allowed to be used during the online knowledge assessment:
Computer with online facilities.
The online knowledge assessment is open book which means that the apprentice can refer to reference books or materials whilst taking the test.
In the test, the apprentice will be permitted to have:
• BS7671 current Edition
• IET Guidance note 3
• Short Guide to Building Regulations.
NET will provide these materials, the apprentice is not permitted to use their own copies in the assessment.
The online knowledge assessment must be taken in the presence of an invigilator who is the responsibility of the EPAO.
The EPAO must have an invigilation policy setting out how the online knowledge assessment must be conducted. It must state the ratio of apprentices to invigilators for the setting and allow the test to take place in a secure way.
The EPAO must verify the identity of the apprentice.
The EPAO is responsible for the security of the online knowledge assessment. The EPAO must ensure that their security arrangements maintain the validity and reliability of the online knowledge assessment.
The online knowledge assessment must be marked by NET licensed independent assessors or markers employed by the EPAO. They must follow a marking scheme produced by the EPAO. Marking by computer is allowed where question types support this.
A correct answer gets 1 mark.
Any incorrect or missing answers get zero marks.
The EPAO is responsible for overseeing the marking of the online knowledge assessment. The EPAO must ensure standardisation and moderation of written response test.
Apprentices must take the online knowledge assessment in a suitably controlled and invigilated environment that is a quiet room, free from distractions and influence.
The online test will take place in a NET licensed centre.
The invigilator will be the NET licensed independent assessor.
The EPAO is required to have an invigilation policy that will set out how the test is to be carried out. The EPAO is responsible for ensuring the security of any multiple-choice tests they administer to ensure the test remains valid and reliable (this includes any arrangements made using online tools). The EPAO is responsible for verifying the identity of the person taking the test.
Questions will be written by NET as the EPAO and must be relevant to the occupation. The EPAO should maintain the security and confidentiality of their questions. The EPAO must develop test specifications and question banks of sufficient size to prevent predictability and review them regularly (and at least once a year) to ensure they, and the questions they contain, are fit for purpose. The specifications, including questions relating to underpinning KSBs must be varied, yet allow assessment of the relevant KSBs. The specification must be relevant to the occupation and demonstrate how to assess the KSBs shown in the mapping. It is recommended this is done in consultation with employers of this occupation. The EPAO should maintain the security and confidentiality of EPA materials when consulting employers. The questions must be unpredictable. A question bank of sufficient size will support this. The test specification and questions must be reviewed at least once a year to ensure they remain fit-for-purpose.
The EPAO must ensure that apprentices have a different set of questions in the case of re-sits and re-takes. The EPAO will produce the following material to support this assessment method:
• a question bank
• test specification
• outline of the assessment method’s requirements
• sample tests and mark schemes
• live tests and mark schemes
The EPAO must ensure that apprentices have a different set of questions in the case of re-sits or re-takes.
Fail - does not meet pass criteria
|
Theme
KSBs
|
Pass
Apprentices must demonstrate all of the pass descriptors
|
|---|---|
|
Preparing, planning and Health and Safety
S2 S3 S8 S15 B1 |
Completes work using the relevant sources of technical information and specifications when planning and performing domestic electrical work. (S2, S8) Demonstrates planning, and correctly carries out and manage own work ensuring work is compliant and complete to the relevant standard with the correct use of personal protective equipment when undertaking domestic electrical work. (S3, S15) Performs responsibly ethically and contributes to safe outcomes. (B1)
|
|
Installation of Circuits
S4 S7 S10 S11 S14 B2 B5 |
Designs, plans, sets up and installs electrical and related electronic systems to meet the requirements of the brief. (S11) Utilises the relevant legislation; building regulations; industry guidance notes; relevant codes of practice, the requirements of the current edition of the Wiring Regulations (BS7671) and related standards. (S7) Selects and uses tools, materials, equipment and components in order to meet the requirements of the brief. (S10) Completes work in a tidy and safe manner, including restoration of the work area on completion of work and performing efficiently to complete the planned work operations. (S4, B5) Demonstrates responsibility for the careful use of resources and disposal of work waste. (B2) |
|
Testing and Condition reporting
S9 S12 S13 S16 S17 |
Applies and uses mathematical techniques, formulae, and calculations for the verification of test results (S9) Completes accurate inspection and testing of domestic electrical installations to diagnose and resolve domestic electrical and electronic faults for both initial and periodic testing of single-phase domestic installations (S12, S13) Demonstrates the installation and maintenance of domestic electrical and electronic equipment and components in accordance with Electrical Installation Condition Report. (S14) Demonstrates the correct completion of Electrical Certificates using a digital platform (S16, S17)
|
Fail - does not meet pass criteria
|
Theme
KSBs
|
Pass
Apprentices must demonstrate all of the pass descriptors
|
Distinction
Apprentices must demonstrate all of the pass descriptors and all of the distinction descriptors
|
|---|---|---|
|
Communication
K4 S5 |
Describes a range and uses of communication techniques and methods when communicating with personnel in different roles including colleagues, customers, and external personnel. (K4, S5)
|
Justifies how the proposed approach to communication is effective. (K4, K5) |
|
Customer Service
K5 S6 B4 |
Describes how they meet the needs of given colleagues and customers. Explains why it is important to deliver a professional service to customers, with courtesy and respect how they value equality and diversity, and how they encourage colleagues and customers to consider the use of net zero/green technologies for a given scenario. (K5, S6, B4)
|
Justifies how the proposed approach to customer service contributes to exceed customer expectations. (S6, B4)
|
|
Safety
K1 S1 |
Explains the importance of being compliant with the health and safety regulations and the hazards that can arise from non-compliance in line with relevant health and safety standards, regulations and practice. Describes how to work in line with health and safety and environment practices, procedures, and regulations when undertaking domestic electrical work, and how to reduce risks. Describes how to monitor and maintain safe working conditions and practices when: working alone, part of a team and when supervised. (K1, S1)
|
Not applicable |
|
Quality and Continuous Improvement and Commercial Awareness
B3 |
Describes how working in line with health, safety and welfare requirements, industry standards, statutory regulation and legislation, policies, and codes of practice ensures quality for the business. Explains the actions when reporting quality issues to help to prevent the same issues occurring in the future. Describes how they would apply continuous improvement techniques to the business. (B3)
|
Not applicable |
|
Continuous Professional Development
K19 B6 |
Describes the importance of, and ways to keep technical knowledge up to date for different situations. (K19, B6)
|
Justifies how proposed approaches to maintain and continuously improving technical knowledge benefits employer, self and customer. (K19, B6)
|
| Grade | Minimum marks required | Maximum marks required |
|---|---|---|
| Fail | 0 | 23 |
| Pass | 24 | 32 |
| Distinction | 33 | 40 |
The EPA methods contribute equally to the overall EPA grade.
Performance in the EPA will determine the apprenticeship grade of:
NET licensed Independent assessors must individually grade the: observation of practical competence in a controlled environment and scenario based interview according to the requirements set out in this EPA plan.
The EPAO must combine the individual assessment method grades to determine the overall EPA grade.
Apprentices who fail one or more assessment methods will be awarded an overall EPA fail.
Apprentices must achieve at least a pass in all the EPA methods in order to achieve an overall pass. In order to achieve an overall EPA distinction, apprentices must achieve a pass in the observation of practical competence assessment method and distinctions in the scenario based Interview and online knowledge test assessment methods. The EPAO must combine the assessment method grades to determine the overall EPA grade. Apprentices who fail one or more assessment methods will be awarded an overall EPA fail.
Grades from individual assessment methods should be combined in the following way to determine the grade of the EPA as a whole.
| Observation of practical competence in a controlled environment | Scenario based interview | Online knowledge assessment | Overall Grading |
|---|---|---|---|
| Fail | Any grade | Any grade | Fail |
| Pass | Fail | Any grade | Fail |
| Pass | Any grade | Fail | Fail |
| Pass | Pass | Pass | Pass |
| Pass | Distinction | Pass | Pass |
| Pass | Pass | Distinction | Pass |
| Pass | Distinction | Distinction | Distinction |
Apprentices who fail one or more EPA method(s) can take a re-sit or a re-take at the employer’s discretion. The apprentice’s employer needs to agree that a re-sit or re-take is appropriate. A re-sit does not need further learning, whereas a re-take does.
Apprentices should have a supportive action plan to prepare for a re-sit or a re-take.
The employer and EPAO agree the timescale for a re-sit or re-take. A re-sit is typically taken within 3 months of the EPA outcome notification. The timescale for a re-take is dependent on how much re-training is required and is typically taken within 3 months of the EPA outcome notification.
Failed EPA methods must be re-sat or re-taken within a 6-month period from the EPA outcome notification, otherwise the entire EPA will need to be re-sat or re-taken in full.
Re-sits and re-takes are not offered to apprentices wishing to move from pass to a higher grade.
An apprentice will get a maximum EPA grade of pass for a re-sit or re-take, unless the EPAO determines there are exceptional circumstances.
| Roles | Responsibilities |
|---|---|
|
Apprentice |
As a minimum, the apprentice should:
|
|
Employer |
As a minimum, the apprentice's employer must:
Post-gateway, the employer must:
|
|
EPAO |
As a minimum, the EPAO must:
|
|
Independent assessor |
As a minimum, an independent assessor must:
|
|
Training provider |
As a minimum, the training provider must:
|
|
Marker |
As a minimum, the marker must:
|
|
Invigilator |
As a minimum, the invigilator must:
|
The EPAO must have reasonable adjustments arrangements for the EPA.
This should include:
Adjustments must maintain the validity, reliability and integrity of the EPA as outlined in this EPA plan.
Internal quality assurance refers to how the EPAO ensures valid, consistent and reliable EPA decisions. The EPAO must adhere to the requirements within the roles and responsibilities section and:
JIB (gold card)
meet the following minimum requirements:current wiring regulations and full inspection and test certificate
Affordability of the EPA will be aided by using at least some of the following:
This apprenticeship standard is recognised by the Joint Industry Board as conferring eligibility for recognition via an ECS Domestic Electrician Gold Card. As part of the application process the appropriate Health and Safety components will be recognised. for This apprenticeship standard is recognised by the Joint Industry Board as conferring eligibility for recognition via an ECS Domestic Electrician Gold Card. As part of the application process the appropriate Health and Safety components will be recognised.
This apprenticeship standard is recognised by the Joint Industry Board as conferring eligibility for recognition via an ECS Domestic Electrician Gold Card. As part of the application process the appropriate Health and Safety components will be recognised
| Knowledge | Assessment methods |
|---|---|
|
K1
Understand relevant health & safety legislation and safe working practices covering hazards and risks when undertaking domestic electrical work and how these can be avoided. Back to Grading |
Scenario based interview |
|
K2
Personal protective equipment (PPE) that should be used when undertaking electrical work, the correct selection of PPE and how to use different PPE. Back to Grading |
Online knowledge assessment |
|
K3
Understand how to, and importance of, restoring the work area to a tidy and safe state on completion of work Back to Grading |
Online knowledge assessment |
|
K4
Effective communication techniques and methods when communicating with people in different roles, and the full range of people and their roles that Domestic Electricians will interact with in their work. Back to Grading |
Scenario based interview |
|
K5
Importance of customer service and effective customer service principles and techniques, taking account of the differences between people and groups of people with respect to equality and diversity Back to Grading |
Scenario based interview |
|
K6
Understand key organisations and their purpose within the electrical installation and maintenance industry, the domestic electrician's role within the industry, and career progression routes Back to Grading |
Online knowledge assessment |
|
K7
Relevant legislation pertaining to Domestic Electrical work including building regulations; industry guidance notes; relevant codes of practice, the requirements of the current edition of the Wiring Regulations (BS7671) and related standards. Back to Grading |
Online knowledge assessment |
|
K8
Relevant sources of technical information and guidance specifically for domestic electrical installation and maintenance work, mainly including electrical drawings and technical specifications and why and how these should be used. Back to Grading |
Online knowledge assessment |
|
K9
Necessary mathematical techniques, formulae, and calculations that underpin a Domestic Electrician’s work. Back to Grading |
Online knowledge assessment |
|
K10
Range of tools, materials, equipment, and components used when performing domestic electrical work, and how to identify and use them safely. Back to Grading |
Online knowledge assessment |
|
K11
Purpose of different domestic electrical and electronic equipment, installations, components and systems and their characteristics, features, installation and maintenance requirements, including domestic heating systems, comfort and convenience technologies and smart home applications and devices. Back to Grading |
Online knowledge assessment |
|
K12
Process and procedures for the design, planning, set up, and installation of domestic electrical and electronic systems Back to Grading |
Online knowledge assessment |
|
K13
Methods of terminating and connecting cables in domestic electrical wiring systems, installations, and equipment. Back to Grading |
Online knowledge assessment |
|
K14
Inspection and Testing of Domestic Electrical Installations using different diagnostic and problem-solving techniques and methods used to find, assess, and resolve domestic electrical and electronic faults for both initial and periodic testing requirements of single-phase installations Back to Grading |
Online knowledge assessment |
|
K15
Importance of accurate preparation, completion, and maintenance of relevant work documentation including observations, test results and certification documents Back to Grading |
Online knowledge assessment |
|
K16
How to prepare written quotes and estimates in a professional manner Back to Grading |
Online knowledge assessment |
|
K17
Application of information technology in the Domestic electrician industry, such as completion of test certificates and work documentation Back to Grading |
Online knowledge assessment |
|
K18
Identify current digital learning platforms, and platforms used for business communication and collaboration. Back to Grading |
Online knowledge assessment |
|
K19
Understand the requirements for continual personal development within the industry and the opportunities for career progression Back to Grading |
Scenario based interview |
| Skill | Assessment methods |
|---|---|
|
S1
Maintain the safety of self and others by applying statutory health and safety policies, procedures, and regulations when conducting domestic electrical work. Back to Grading |
Scenario based interview |
|
S2
Identify and comply with all relevant legislation, regulations, codes of practice and other relevant information and guidance when planning and performing domestic electrical work. Back to Grading |
Observation of practical competence in a controlled environment |
|
S3
Correctly identify and use personal protective equipment (PPE) that should be used when undertaking domestic electrical work. Back to Grading |
Observation of practical competence in a controlled environment |
|
S4
Carry out work in a tidy and safe manner, including restoration of the work area on completion of work Back to Grading |
Observation of practical competence in a controlled environment |
|
S5
Communicate using effective techniques and methods with colleagues, customers, contractors, suppliers and others Back to Grading |
Scenario based interview |
|
S6
Apply appropriate customer service principles and techniques to deliver the required customer service Back to Grading |
Scenario based interview |
|
S7
Apply relevant legislation; building regulations; industry guidance notes; relevant codes of practice, the requirements of the current edition of the Wiring Regulations (BS7671) and other relevant standards while carrying out work Back to Grading |
Observation of practical competence in a controlled environment |
|
S8
Use relevant sources of information and guidance for domestic electrical installation and maintenance work, typically including electrical drawings and technical specifications. Back to Grading |
Observation of practical competence in a controlled environment |
|
S9
Apply and use necessary mathematical techniques, formulae, and calculations that underpin a Domestic Electrician’s work Back to Grading |
Observation of practical competence in a controlled environment |
|
S10
Safely and correctly use a range of tools, materials, equipment, and components relevant to performing domestic electrical work. Back to Grading |
Observation of practical competence in a controlled environment |
|
S11
Design, plan, set up, and install domestic electrical and electronic systems including terminating and connecting cables in domestic electrical wiring systems, installations, and equipment Back to Grading |
Observation of practical competence in a controlled environment |
|
S12
Inspect and test domestic electrical Installations using the correct test equipment Back to Grading |
Observation of practical competence in a controlled environment |
|
S13
Apply diagnostic and problem-solving techniques to identify, assess and resolve domestic electrical and electronic faults for both initial and periodic testing requirements of single-phase installations Back to Grading |
Observation of practical competence in a controlled environment |
|
S14
Install and maintain domestic electrical and electronic equipment and components, including domestic heating systems, comfort and convenience technologies, heat pumps, solar panels, Electric Vehicle (EV) charging points and devices Back to Grading |
Observation of practical competence in a controlled environment |
|
S15
Carry out and manage own work ensuring work is compliant to the relevant standard Back to Grading |
Observation of practical competence in a controlled environment |
|
S16
Record work accurately using correct processes including completion and maintenance of work documentation, recording of test results and preparation of appropriate certification Back to Grading |
Observation of practical competence in a controlled environment |
|
S17
Use relevant digital learning platforms and business communication and collaboration applications Back to Grading |
Observation of practical competence in a controlled environment |
| Behaviour | Assessment methods |
|---|---|
|
B1
Acts responsibly and contributes to safe outcomes. Puts health and safety first for themselves and others. Embeds a health and safety culture and is always hazard and risk aware during work. Challenges any unsafe practices and demonstrates personal accountability Back to Grading |
Observation of practical competence in a controlled environment |
|
B2
Embraces a sustainable working culture, taking responsibility for the careful use of resources and disposal of work waste Back to Grading |
Observation of practical competence in a controlled environment |
|
B3
Demonstrates commitment to quality, commercial awareness, and continuous improvement by complying with health, safety and welfare requirements, industry standards, statutory regulation and legislation, policies, and codes of practice. Back to Grading |
Scenario based interview |
|
B4
Focuses on the requirements of the customer (internal and external), seeking to provide outstanding customer services, promoting green technologies when appropriate, meeting, or exceeding customer requirements, including customers with diverse needs and transitioning to green technologies. Back to Grading |
Scenario based interview |
|
B5
Manages own time efficiently to complete work operations and effectively schedule work within the confines of job responsibility Back to Grading |
Observation of practical competence in a controlled environment |
|
B6
Committed to keeping up to date with industry best practice, relevant legislation and technical standards and undertaking personal CPD in line with industry best practice. Back to Grading |
Scenario based interview |
| KSBS GROUPED BY THEME | Knowledge | Skills | Behaviour |
|---|---|---|---|
|
Preparing, planning and Health and Safety
S2 S3 S8 S15 B1 |
None |
Identify and comply with all relevant legislation, regulations, codes of practice and other relevant information and guidance when planning and performing domestic electrical work. (S2) Correctly identify and use personal protective equipment (PPE) that should be used when undertaking domestic electrical work. (S3) Use relevant sources of information and guidance for domestic electrical installation and maintenance work, typically including electrical drawings and technical specifications. (S8) Carry out and manage own work ensuring work is compliant to the relevant standard (S15) |
Acts responsibly and contributes to safe outcomes. Puts health and safety first for themselves and others. Embeds a health and safety culture and is always hazard and risk aware during work. Challenges any unsafe practices and demonstrates personal accountability (B1) |
|
Installation of Circuits
S4 S7 S10 S11 S14 B2 B5 |
None |
Carry out work in a tidy and safe manner, including restoration of the work area on completion of work (S4) Apply relevant legislation; building regulations; industry guidance notes; relevant codes of practice, the requirements of the current edition of the Wiring Regulations (BS7671) and other relevant standards while carrying out work (S7) Safely and correctly use a range of tools, materials, equipment, and components relevant to performing domestic electrical work. (S10) Design, plan, set up, and install domestic electrical and electronic systems including terminating and connecting cables in domestic electrical wiring systems, installations, and equipment (S11) Install and maintain domestic electrical and electronic equipment and components, including domestic heating systems, comfort and convenience technologies, heat pumps, solar panels, Electric Vehicle (EV) charging points and devices (S14) |
Embraces a sustainable working culture, taking responsibility for the careful use of resources and disposal of work waste (B2) Manages own time efficiently to complete work operations and effectively schedule work within the confines of job responsibility (B5) |
|
Testing and Condition reporting
S9 S12 S13 S16 S17 |
None |
Apply and use necessary mathematical techniques, formulae, and calculations that underpin a Domestic Electrician’s work (S9) Inspect and test domestic electrical Installations using the correct test equipment (S12) Apply diagnostic and problem-solving techniques to identify, assess and resolve domestic electrical and electronic faults for both initial and periodic testing requirements of single-phase installations (S13) Record work accurately using correct processes including completion and maintenance of work documentation, recording of test results and preparation of appropriate certification (S16) Use relevant digital learning platforms and business communication and collaboration applications (S17) |
None |
| KSBS GROUPED BY THEME | Knowledge | Skills | Behaviour |
|---|---|---|---|
|
Communication
K4 S5 |
Effective communication techniques and methods when communicating with people in different roles, and the full range of people and their roles that Domestic Electricians will interact with in their work. (K4) |
Communicate using effective techniques and methods with colleagues, customers, contractors, suppliers and others (S5) |
None |
|
Customer Service
K5 S6 B4 |
Importance of customer service and effective customer service principles and techniques, taking account of the differences between people and groups of people with respect to equality and diversity (K5) |
Apply appropriate customer service principles and techniques to deliver the required customer service (S6) |
Focuses on the requirements of the customer (internal and external), seeking to provide outstanding customer services, promoting green technologies when appropriate, meeting, or exceeding customer requirements, including customers with diverse needs and transitioning to green technologies. (B4) |
|
Safety
K1 S1 |
Understand relevant health & safety legislation and safe working practices covering hazards and risks when undertaking domestic electrical work and how these can be avoided. (K1) |
Maintain the safety of self and others by applying statutory health and safety policies, procedures, and regulations when conducting domestic electrical work. (S1) |
None |
|
Quality and Continuous Improvement and Commercial Awareness
B3 |
None |
None |
Demonstrates commitment to quality, commercial awareness, and continuous improvement by complying with health, safety and welfare requirements, industry standards, statutory regulation and legislation, policies, and codes of practice. (B3) |
|
Continuous Professional Development
K19 B6 |
Understand the requirements for continual personal development within the industry and the opportunities for career progression (K19) |
None |
Committed to keeping up to date with industry best practice, relevant legislation and technical standards and undertaking personal CPD in line with industry best practice. (B6) |
Contact us about this apprenticeship
| Version | Change detail | Earliest start date | Latest start date | Latest end date |
|---|---|---|---|---|
| 1.0 | Approved for delivery | 01/06/2022 | Not set | Not set |
Crown copyright © 2024. You may re-use this information (not including logos) free of charge in any format or medium, under the terms of the Open Government Licence. Visit www.nationalarchives.gov.uk/doc/open-government-licence