Engineering maintenance technician - dual discipline

This apprenticeship standard has been approved for delivery by Skills England. However, starts on the apprenticeship will only be possible once a suitable end-point assessment organisation (EPAO) has obtained Ofqual recognition. Once the EPAO has obtained Ofqual recognition, funding for apprentice starts will be permitted and this message will be removed.

Key information

  1. Status: Approved for delivery (paused for starts)
  2. Reference: ST1443
  3. Version: 1.0
  4. Level: 3
  5. Options: Electrical and control and instrumentation engineering maintenance technician, Electrical and mechanical engineering maintenance technician
  6. Typical duration to gateway: 48 months
  7. Typical EPA period: 4 months
  8. Route: Engineering and manufacturing
  9. Integration: None
  10. Maximum funding: £27000
  11. Date updated: 14/07/2025
  12. Approved for delivery: 23 June 2025
  13. Lars code: 815
  14. Class code: Z0001890
  15. EQA provider: Ofqual is the intended EQA provider
  16. Example progression routes:
  17. Review: this apprenticeship will be reviewed in accordance with our change request policy.

This apprenticeship has options. This document is currently showing the following option:

Contents

Contents

Apprenticeship summary

Overview of the role

Conducting maintenance of engineering plant and equipment

Occupation summary

Engineering maintenance technicians work in a range of industries that use plant - machinery, apparatus and fixtures - and equipment. This includes energy, leisure entertainment, manufacturing, processing, and utilities companies. The working environments vary across the industries.

This is a core and options apprenticeship. An apprentice must be trained and assessed against the core and one option. The options are:

  • electrical and control and instrumentation technician
  • electrical and mechanical maintenance technician

Electrical and control and instrumentation maintenance technicians work covers electrical and control and instrumentation. For example, motors, single-phase and three-phase, power supplies, low voltage or high-voltage electrical distribution, programmable logic controllers, flow meters, heat exchangers and safety controls.

Electrical and mechanical maintenance technicians work covers electrical and mechanical. For example, motors, single-phase and three-phase, power supplies, and low voltage or high-voltage electrical distribution, actuators, fans, pumps, valves, gearboxes, and pipework.

Engineering maintenance technicians maintain plant and equipment to optimise operation. They conduct planned and preventative maintenance to prevent issues occurring and reactive maintenance when problems occur. For example, responding to breakdowns. They must prepare for and accept jobs, complete work safely to required standards, close the job, and complete work records. They also contribute to continuous improvement activities. They may complete work as part of a team or alone, depending on the task.

Daily, they interact with other maintenance technicians, engineers, and support operatives. They also have contact with other internal and external stakeholders. This may include operations, managers, quality, research and development, and admin staff. They may also have contact with auditors, regulators, and customers undertaking site visits. They typically report to an experienced maintenance engineer.

They must maintain the safe and reliable operation of plant and equipment. Work must comply with any industry specific regulations. Safety is a key priority. They must comply with health, safety, and environmental regulations and procedures and sustainability practices. They must complete tasks in line with their company’s procedures and timescales. They also must also take account of business operation considerations such as cost and service level agreements.

Typical job titles include:

Control, instrumentation and automation technician Electrical and instrumentation craftsperson Electrical and instrumentation technician Electrical and mechanical maintenance craftsperson Electrical and mechanical maintenance technician Engineering maintenance technician Engineering technician Maintenance and operations engineering technician Maintenance engineering technician Maintenance technician

End-point assessment summary

ST1443, Engineering maintenance technician - dual discipline level 3

This is a summary of the key things that you – the apprentice and your employer need to know about your end-point assessment (EPA). You and your employer should read the EPA plan for the full details. It has information on assessment method requirements, roles and responsibilities, and re-sits and re-takes.

What is an end-point assessment and why it happens

An EPA is an assessment at the end of your apprenticeship. It will assess you against the knowledge, skills, and behaviours (KSBs) in the occupational standard. Your training will cover the KSBs. The EPA is your opportunity to show an independent assessor how well you can carry out the occupation you have been trained for.

Your employer will choose an end-point assessment organisation (EPAO) to deliver the EPA. Your employer and training provider should tell you what to expect and how to prepare for your EPA.

The length of the training for this apprenticeship is typically 48 months. The EPA period is typically 4 months.

The overall grades available for this apprenticeship are:

  • fail
  • pass
  • merit
  • distinction

When you pass the EPA, you will be awarded your apprenticeship certificate.


EPA gateway

The EPA gateway is when the EPAO checks and confirms that you have met any requirements required before you start the EPA. You will only enter the gateway when your employer says you are ready.

The gateway requirements for your EPA are:

  • achieved English and mathematics qualifications in line with the apprenticeship funding rules
  • for the interview underpinned by a portfolio of evidence, you must submit a portfolio of evidence

Assessment methods

Observation with questions

You will be observed by an independent assessor completing your work. It will last at least 5 hours. They will ask you at least 6 questions.


Interview underpinned by a portfolio of evidence

You will have an interview with an independent assessor. It will last at least 90 minutes. They will ask you at least 10 questions. The questions will be about certain aspects of your occupation. You need to compile a portfolio of evidence before the EPA gateway. You can use it to help answer the questions.


Multiple-choice test

You will complete a multiple-choice test. It will be closed book, meaning you will not have access to any books or reference materials.
In the test you can have:

a scientific calculator

The test will have 50 multiple-choice questions. You will have 75 minutes to complete it.



Who to contact for help or more information

You should speak to your employer if you have a query that relates to your job.

You should speak to your training provider if you have any questions about your training or EPA before it starts.

You should receive detailed information and support from the EPAO before the EPA starts. You should speak to them if you have any questions about your EPA once it has started.Reasonable adjustments

If you have a disability, a physical or mental health condition or other special considerations, you may be able to have a reasonable adjustment that takes this into account. You should speak to your employer, training provider and EPAO and ask them what support you can get. The EPAO will decide if an adjustment is appropriate.


Professional recognition

This apprenticeship aligns with Institution of Mechanical Engineers (IMechE) for Engineering Technician (EngTech)

Please contact the professional body for more details.

This apprenticeship aligns with The Institution of Engineering and Technology (IET) for Engineering Technician (EngTech)

Please contact the professional body for more details.

Content loading...
Content loading...

Version log

Version Change detail Earliest start date Latest start date
1.0 Approved for delivery 23/06/2025 Not set
Employers involved in creating the standard: Alpek Polyester, Conoco Phillips, Digital Realty, Drax, EDF Energy, Enfinium, Enva, Evo Energy, Exxon Mobil, Finning, Green Energy, Exxon Mobil, Husqvarna, Ineos, Jaguar Land Rover, MoD, National Grid, NHS, Orsted, RWE, Sellafield Sites, Siemens, SSE, Sterling PSL, Swizzels Matlow, Tesco, Tronox, Veolia, Westinghouse.

Crown copyright © 2025. You may re-use this information (not including logos) free of charge in any format or medium, under the terms of the Open Government Licence. Visit www.nationalarchives.gov.uk/doc/open-government-licence

Is this webpage useful?

Thank you for your feedback

Tell us about your experience